- Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow. High Gain, High Value, High Performance.
- Low-noise receives gain. Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g (2.4 GHz mode only). Ideal for increase the 2000-2500 MHz frequency devices.
- Signal activity LED indicates. Maximum output power of 2000mW by the Booster. Plug-and-play, Easy installation, no driver needed.
- Increase the effective range and coverage area of your Wi-Fi network. The amplified wireless signal may even penetrate complex environments with many walls and obstacles.
- NOTE: The item need connect with the Access Point Router together, then it can work and the Access Point Router is NOT included.
1. Operation Range: 2400-2500 MHz
2. Operation Mode: Bi-directional, half-duplex, auto-switching via carrier sensing
3. Frequency Response: ¡À 1dB over operation range
4. Input Power: 6dBm (Min.)-20dBm (Max.)
5. Input Power: 5 ~ 20 dBm
6. Optimal Input Power: 9 ~ 13 dBm
7. Output Power: 2000mW/33dBm nominal for 802.11b/11Mbps
8. Connector: SMA Receptacle, 50 ohm
9. Transmit Gain: 13-17dBm nominal
10. Receiver Gain: 8-12dBm
11. Receive Noise Figure: 3.0dBm nominal
12. Operating Temperature: 20 to 70 degree
13. Operating Humidity: Up to 95% relative humidity
14. Material: Cast Aluminum
15. Size: 9cm*5.6cm*3.1cm
16. Weight: 341g
1 * Booster
1 * Power plug
1 * 15cm SMA cable
1 * 5 dBi antenna
1 * Instruction
List Price: $ 49.99
Price: $ 25.99
More Antena Wifi Products